We have purpose designed a board that you can buy. SeeMaking an RS232 adaptor. Crimped up a RJ11 6P6C onto a piece of cat5 cable. Repurposed a PCB which has a Max232 onboard to do the hookup. The chip needed for this convertor is the MAX3232 - this works at 3.3V (costs rather more than a MAX232 - tried a MAX232, it doesn't work). Turns out that the serial port socket on the Livebox isn't a 'standard' RJ11 connector - it is a MMJ connector with the retaining clip offset from the centre of the socket - a standard RJ11 needs to have its clip cut off to allow the connector to enter.
![]()
Nov 24, 2019 Catalogues PFE 2020: Sagemcom - Gfi - Telnet - Altran - Chifco - Vneuron Contact & Business: [email protected]. يلزمك تبدّل كان تستعمل في Windows 7.
This gives 'reduced' insertion force, but there is a slight resistance - just enough to keep the connector in place - not great for permanent setups.On the PCB, there are solder pads for an RJ11 style socket - but no socket is populated on the board. It was hoped that this might expose a second serial port, but this is not the case. When connected at 115200 Baud, No Parity, 8 Data Bits, 1 Stop Bit we are presented with a Login prompt. But we are asked for a root password. Doh!So now getting in is going to be so much easier. Just change the Livebox Name (in browser UI menu Configuration→Advanced→Wireless) to each of the following in sequence: This works with UK firmware: 5.04.3.
There are a number of sites that give instructions on hacking in. This is a slightly modified version of what you'll normally find.Connect an Ethernet patch cable to the yellow port on the Livebox & browse tonext part of the process uses a 'backdoor' settings on the Livebox web server. These work in conjunction with an ftp server running on the PC that is connected to the Livebox. Since the Livebox runs Busybox, the 'wget' command is available to allow files to be pulled onto the Livebox via ftp. So setup an ftp server on your PC (we used FileZilla Server on Windoze) & enable 'anonymous' access. If this is the first time that you have configured an ftp server, you will need to read and understand the user-guide for your ftp server before proceeding. Also note that if you are running Vista, you will want to run the ftp server as the 'admin' user.1.
On the Livebox browser UI, in 'Configuration→Advanced→Network', change the LAN IP address to be 10.0.0.12. Configure the other options to suit, deselect 'Enable DHCP Server' and select Submit and Apply the configuration. The Livebox will now automatically reboot.3. Now change the IP address of your PC to 10.0.0.2 and make the gateway 10.0.0.14. Download into the FTP area on your PC and rename this file as u. We do this because we only have a limited number of characters available to us in the field we are using for the backdoor hack.For info, here is what the tarfile contains:$ tar tvf etc.tar-rwxrwxrwx root/root -01-01 01:00 utelnetd-rwxr-xr-x root/root 145 1970-01-01 01:06 init.d/telnetdlrwxrwxrwx root/root 0 1970-01-01 01:02 rc2.d/S35telnet -./init.d/telnetdlrwxrwxrwx root/root 0 1970-01-01 01:02 rc1.d/S35telnet -./init.d/telnetd5.
![]()
Applies To: Windows Server (Semi-Annual Channel), Windows Server 2016, Windows Server 2012 R2, Windows Server 2012
Communicates with a computer running the telnet Server service.
SyntaxParameters
Remarks
Examples
Use telnet to connect to the computer running the telnet Server Service at telnet.microsoft.com.
Use telnet to connect to the computer running the telnet Server Service at telnet.microsoft.com on TCP port 44 and log the session activity in a local file called telnetlog.txt
additional references![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |